Tag Archives: Electrical Product Reconditioning

Sorting Through The Misconceptions of Reconditioned Products

A lot of misconceptions surround products labeled as reconditioned, refurbished, and as-is.  Reconditioned products are products that have been returned to the manufacturer or a third-party company to thoroughly be checked, taken apart, repaired, put back together, tested, and sold.  They are unable to be sold as new without going through the refurbishing process, even if they are in mint condition.  Many electronics, large scaled manufacturing equipment, appliances, and electrical goods are sold in this manner. 

Purpose of Factory Reconditioning

There are a number of reasons that product reconditioning exists. One reason, consumers will return items that are defective or may have become damaged.  Sometimes however there is nothing wrong with the item but once it has been purchased and returned, electric items and manufacturing components can’t be sold as new.  Other times equipment and components are becoming obsolete and the only way to have replacement parts for repair is for manufacturers to refurbish components and manufacturing equipment.  This is common in transformers, panel switches, and bus ducts & plugs.

The Reconditioning Process

Each product reconditioning specialist has their own set of standards that refurbished products and components need to go through before being resold.  Some reconditioned products are sold “as new” which means that they have run through a series of checks and balances to ensure all the issues, cosmetic and functional, are fixed. Other companies disassemble, inspect, repair, reassemble, tests, and then and only then is a product fit for resale.  This is often the case in manufacturing and larger scaled equipment like transformers, disconnect, and such. 

Advantages with Reconditioning

Obviously, reconditioning comes with cost savings over buying new. Manufacturers can’t charge the new prices for products that are refurbished.  Prices will vary on reconditioned components based on the supplier and of course the product.  As do new products, most refurbished products offer a warranty.  It is important to research the warranty and return policy of any reconditioned/refurbished product you purchase.

Difference between Factory Reconditioning and Third-Party Refurbishment

Most often when a product is labeled as “factory reconditioned” it means that it has been refurbished by either the manufacturer or a third-party that is certified.  When you purchase a reconditioned part or equipment you should expect that it has been tested and repaired to meet all of the original standards of a new product.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com



Benefits of Installing Refurbished Equipment

In a manufacturing facility there are many different pieces of equipment working in conjunction with one another to ensure the process runs smoothly.  When one of the pieces breaks down and needs to be repaired or replaced time is of the essence in keeping downtime to a minimal.  The goal for most facilities is to repair equipment as purchasing new equipment is timely, availability is often scarce, and it is not always cost effective.  When large scaled manufacturing equipment cannot be repaired, and new equipment is not readily available the next logical step is to consider refurbished equipment

Why Refurbished May Be Best Option

Refurbished equipment is often considered better than brand new equipment for a number of reasons.  First, older equipment that has gone through the refurbishment process are sure to have the “new equipment” bugs worked out.  Equipment that has been refurbished is beneficial because it often costs less.  The equipment you can purchase refurbished is often of a higher quality than would be purchased new at the same cost.  Lastly, each piece of refurbished electrical equipment goes through a strict testing process.  It is almost guaranteed you will not experience downtime due to equipment failure soon after refurbished components are installed at your facility. 

The Refurbishing Process

During the refurbishing process equipment is completely disassembled.  Parts within the piece are inspected and if needed replaced with new or refurbished electrical components to ensure the safety of each piece.  Once the components are all tested and put back together equipment must go through and pass rigorous testing.  The reconditioning process consists of disassembling, testing, cleaning, inspecting, replacing or repairing the piece from the inside out. 

Refurbished equipment is readily available.  It is possible to find the same system you have been working with for years refurbished which makes replacement as simple as disconnecting malfunctioning equipment and replacing it with the refurbished unit.  Often when installing new equipment there will need to be some reconfiguration of systems already in place to make room the layout of the new equipment. 

Refurbished Parts Are Readily Available

Another major benefit of installing refurbished equipment is the availability of components if something does break down.  New equipment is often harder to access parts for as they are new to the market and manufacturers are not prepared for the need for parts for repair.  Many suppliers of reconditioned equipment also have warehouses of new, obsolete, and refurbished components that are readily available if a repair is needed.  Again, improving downtime due to equipment failure.

There are many myths out there surrounding the purchase and use of refurbished equipment and components in equipment repair.  It is important to do research before purchasing any equipment from suppliers that you are unfamiliar with.  Developing a relationship with a supplier of new, refurbished, & obsolete components and equipment helps prevent downtime in production.  Companies like J and P also offer services including asset recovery, plant clean out, and refurbishing which is beneficial in the removal of equipment should the need arise.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com



How Will We Know if We Should Replace or Recondition Large Scaled Electrical Equipment?


Transformers are used in industrial and manufacturing settings as a way to control the electricity infrastructure within a facility.  They are used to step up and power down different voltages of electricity to equipment throughout.  The longevity of transformers comes down the environment in which they are ran and the amount of usage received.  A typical end of life period for transformers under average usage is somewhere between twenty to forty years.  Factors other than age are often used to consider if a transformer should be replaced.  With this in mind, many facilities are considering refurbishing older transformers that are still showing signs of good health instead of replacement. 

In the following installment we will look at the many reasons that refurbishment of transformers is becoming popular verse replacement.  We will also look at why some transformers can be refurbished and why others shouldn’t be.  There are limitations to refurbishing transformers that we will look into as well. 

Why Choose to Refurbish Verse Replace?

Refurbishing Transformers Saves Money and Time

The cost to refurbish a transformer is substantially less than purchasing a brand new one.  Cost is definitely a factor in refurbishing, but it is also important to recognize the time saving.  The time to refurbish a transformer is substantially less than the time it takes to procure a new piece of electrical equipment for your facility, such as a transformer.

Buying new equipment often comes about through a lengthy process that requires approval from a number of sources before it can be completed.  It is also considered a capital expense which many facilities try to budget ahead for.  Refurbishment is often classified as a revenue expense which doesn’t often require approval.  Extending the life of quality assets is good for business and refurbishing can achieve this without risk. 

Extended Transformer Life

We are all responsible for doing our part in creating a sustainable environment to leave to generations to come.  The environmental impact of manufacturing and equipment disposal is not something that is taken lightly.  Reconditioning transformers and other large scaled equipment helps to demonstrate environmental sustainability which is not only showing corporate responsibility but also regulatory consciousness.  Prolonging the life of large scaled equipment through reconditioning is just one way to exhibit your company’s commitment to environmental impact as well as to the confidence that the plant will continue to operate efficiently without risk of unexpected failure.

If you do find that you have had to replace a transformer for a reason other than failure, the older transformer can be refurbished and kept as a spare.  In order to determine if a transformer can be refurbished it is necessary to assess the transformer.  The extent of reconditioning needed to make it like new again may be deemed too much.  However, when refurbishment is deemed appropriate, the transformer is brought to a dedicated facility where reconditioning can be performed. 

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com



Are There Benefits of Purchasing Reconditioned Electrical Parts and Equipment?


Reconditioned electrical components and equipment are a popular option within the industry because of the benefits and tangible environmental, social, economic, and political climate benefits they provide.  Manufacturing, industrial, and organizational facilities are interested in saving money when purchasing and maintaining electrical equipment and parts thus the popularity of reconditioned electrical products.  There are many immeasurable benefits that are attached with refurbished electrical products some of which we will discuss below.

Saving Electrical Jobs

Manufacturing jobs are scarce no matter where in the world you are.  The industry on a whole has seen stagnated growth.  Not only is manufacturing taking a hit but so are the training programs and schools that prepare skilled workers.  Refurbishing is a trend in that is helping to turn those statistics around.  Reconditioning offers on-the-job training which increases the demand for skilled workers.  

Good for the Environment

A major concern we are facing is how our daily lives are affecting the environment and world we are leaving for our children.  This is another benefit that comes with reconditioning.  Industrial plants are a major source of usable electrical equipment and components.  When plants close companies like J & P Electrical are called in to strip usable electrical assets from the location to be refurbished and resold.  This process helps prevent usable electrical products from filling up landfills and converting them into refurbished equipment and components.  Reconditioning electrical components guarantees that they are disassembled, cleaned, plated, updated, tested, inspected, and finally able to be resold.

Increased Safety

Electrical equipment such as circuit breakers and transformers can cost tens of thousands of dollars to replace.  Often what this means is that facilities will continue to use faulty equipment far past the point at which it is safe.  Reconditioned circuit breakers or refurbished transformers are a game changer as they cost significantly less than new.  By using reconditioned parts not only do organizations save money, they significantly reduce downtime.  Manufactures save money while increasing safety by using quality reconditioned electrical components

It is important to recognize that reconditioned products are not counterfeit products.  Refurbishment is the process that brings older electrical equipment and components back to a level that often exceeds original manufacturer requirements.  Some components are obsolete, and reconditioning allows equipment that is still useable to run.  Newer components are often not supported by older machines. 

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com



Fact or Fiction? What Do You Believe About Reconditioned Electrical Equipment?

There are several common myths surrounding the use of reconditioned electrical equipment and components. Is it really true that with the purchase of refurbished manufacturing equipment and parts can truly save companies time and money while also meeting environment goals?  It is our goal in this installment to debunk several myths that surround the use of reconditioned equipment and parts in the work place.

It is important to note that business decisions should always be based on facts instead of myths.  Many times, myths are just handed down stories and experiences of one user that have been embellished upon throughout the years.  In order to successfully navigate and grow your company it is crucial for companies to make decisions based on facts.  When it comes to being competitive the goal is to find a solution that meets your needs.  Purchasing high quality electrical equipment and components at a reasonable price with little to no down time should be of the highest priority.

Myth #1: Original Equipment Manufacturers Are the Only Ones That Can Properly Recondition Electrical Parts and Equipment

The biggest difference between public reconditioning companies and private OEM recondition services is the inspection process they must go through to be available for resale.  This is why it is important that you only buy from reputable product reconditioning companies like J and P Electrical Company.

At J and P, you can rest knowing that we only sell the highest quality reconditioned electrical distribution equipment available.   The standards set forth by the experts at J and P are in fact more stringent than any set-in place by OEM manufacturers.  We disassemble each part, cleaning and inspecting each one, replacing parts that need to be replaced as we go along.  They are then painted with high quality paints and acrylic enamel for durability.  Equipment is reassembled and tested until it exceeds manufacturers UL certification standards.

Myth #2: Liability Concerns are Increased with the Use of Reconditioned Electrical Equipment and Parts

When you are purchasing a part does it make you feel better to know it is fresh off the line or that it has been rigorously tested over and over again to ensure its safety?  When you purchase reconditioned parts and equipment from a company like J and P you can rest assured knowing it has been tested two times over, before and after reconditioning, each and every time.  There is less liability involved in products and equipment that have gone through arduous testing.

 

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

What to Avoid When Purchasing Refurbished Electrical Components

Buying refurbished electrical components such as circuit breakers, transformers, bus ducts and plugs is just one way that industrial manufacturers can save a great deal of money.  The one aspect that needs to be seriously considered is where companies purchase refurbished electrical components.  Buying from reputable refurbished manufacturers is a must when it comes to electrical components that will be used in any settings, especially the manufacturing industry.  Some companies, often less reputable offer deep discounts.  It is crucial to ensure that the savings don’t equate to an increased safety risk.

When purchasing refurbished electrical components, especially from online companies like ebay take note to thoroughly check over equipment for damage, rust, missing pieces, or improper labeling. When buying online it is important to know exactly what you are looking for before you make a purchase.  This can help to ensure that you are sure to get exactly what you need.  Once you have developed a relationship with an online supplier through ebay or another online source you will have more confidence in purchasing through them in the future.

What to Avoid When Purchasing Refurbished Electrical Components

  • Be sure you know what you are looking to purchase. Purchasing electrical components is different than a lot of other purchases in that you should do some research to really know what you need and are looking for before you even begin researching places to purchase it.  Understand the different brands available and the part number that you are looking for.
  • Advertising and ads are meant to draw people in. Don’t get taken by an ad that doesn’t offer specifics on products that you are interested in purchasing.  You should know in detail what you are purchasing and the exact condition it is in.  Understanding the difference between new, used, and refurbished electrical components helps to make sure you are getting exactly what you expect.
  • If the information you need is not clearly listed on the products label it is important to ask questions about the product and get all answers in writing. This clear communication between seller and buyer will help prevent confusion and later disputes.
  • Never buy from a company that doesn’t have a solid track record. Before purchasing any electrical parts and components, new or used, do research on the company offering it for sale.  Does the company have reviews and testimonials?   How long have has the company been in business?  What is their return policy?  Seek out their policies; find out if there is a restocking fee if a return needs to be done, if they offer returns, or if it is exchange only.

Questions to Ask When Buying Refurbished Parts and Components

  • Am I purchasing a new, used, or refurbished part?
  • If refurbished, what is the process, in detail, that the part goes through before it can be sold?
  • What are the company’s product guarantees and warranties?
  • Am I buying a piece that is in proper working order or is it being sold as is, for parts only?
  • What is the testing process your refurbished parts go through before they are sold?

Purchasing refurbished parts and components makes solid business sense especially in an economy where we are trying to stretch our already tight budgets.   It is important to have properly working and maintained equipment when working in any industrial manufacturing setting.  One was to ensure this occurs is to purchase your refurbished electrical components and parts from companies with a solid reputation, like J & P Electrical Company.

J & P Electrical Company is a full-service electrical company that supplies contractors, end users, and supply houses with new surplus, quality reconditioned, and obsolete electrical equipment. We purchase a wide range of electrical equipment such as bus plugs, bud ducts, panel switches, substations, and transformers.  More information can be found at https://www.jpelectricalcompany.com

Understanding Your Business’s Breaker Panel

Technology has been growing faster and faster in recent years, and your business seems to need to use it all to keep up with your competition.  All those computers and other technological devices that are helping your business grow are taking up more power and space in your business’s breaker panel, which can lead to trouble after a while.

That means that your breaker panel eventually may not be large enough to handle everything and you may find that your company will go in the dark every so often.  There are a few signs that you should look out for to see if it is time to replace your business’s breaker panel.  One of the most noticeable things that you will see are flickering lights.  While you may think that your light bulbs just need to be changed, the fact is that you may need a new breaker panel installed instead.

Another sign may be that your panel switches keep tripping and shutting things down.  This may not be a big deal the first time that it happens, but after a while, it can affect the productivity of your work.  You should also be able to read what each panel switch is connected to, and if you can’t then it can be difficult to know which panel switches to flip when you need to cut the power to something in your office.

Strange buzzing noises or popping sounds are never a good sign either, and anything like that can quickly cause an electrical fire to start.  You may want to try to ignore many of these signs, in hopes that you can just get by to save money, but we recommend getting these things fixed immediately.

Here at we offer for sale an abundance of reconditioned electrical surplus options.  All our reconditioned breaker panels meet the strictest safety requirements, and if it weren’t for the lower cost, you would have no idea that these units were reconditioned when you look at them.

We can find a new breaker panel that will fit your current and future needs in our reconditioned electrical surplus and install it quickly, so that your business does not experience too much downtime.  Since these breaker panels are ready to go, all we need to do is hook them up and attach everything before turning them on.  This is much cheaper than rewiring and the many other options that some other electrical companies offer.

We know that your time is valuable to your business, and we have found that using reconditioned electrical surplus items can save you that time as well as a lot of money.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

5 Reasons To Consider Reconditioned Electrical Components For Manufacturing

Just because you think something is broken or doesn’t work anymore doesn’t mean it’s true. There is such a thing as product reconditioning in the electrical industry.  Companies need to be aware that this is a great way to get electrical components for your company especially if working with limited resources. Just because they are reconditioned components doesn’t mean they are of lesser quality than if you were to purchase new components.  In fact, many times the bugs and kinks have all been worked out of the reconditioned components therefore making them more valuable. Here are a few reasons why you shouldn’t think less about reconditioned electrical components and use them for your company.

Lower Costs

Every business is concerned with saving money. Buying refurbished industrial equipment will save your company a great deal of capital. On average, your company will save about 50% to 70% when buying refurbished industrial equipment over new equipment. You’ll be able to use this money in other areas of business to help you grow.

Greater Peace of Mind

Not only do reconditioned electrical components cost less, but you can rest assure that the products you’re getting are completely rebuilt, inspected and tested multiple times to make sure everything works as if it was new. Another benefit as mentioned earlier is that equipment that has been used for awhile and reconditioned has had a chance to have the kinks worked out.  Problems that often arise with new equipment have been worked out and dealt with.

More Stringent Standards

Companies that are in business to reconditioned electrical components know when a product still life has to offer.  Therefore, it is important to purchase components from a reputable company.  This will help to ensure you are getting quality parts that have been processed at the highest of standards.  You will be sure to get the best in reconditioned equipment and components.

Like New Appearance

Reconditioned electrical components are not only rebuilt and cleaned before being inspected, but they are also painted using quality paint and exclusive acrylic enamel chosen for its durability so that they look as good as new.

Increased Inspections

To ensure all refurbished industrial equipment runs right, the product is tested and re-tested again to meet or exceed the manufacturer’s UL certification.  Each component is not only cleaned but also lubricated, reassembled and thoroughly tested before being allowed to be resold.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

 

Purchasing Refurbished Equipment Over New

Running a business of any kind can be an expensive endeavor, especially when it comes to companies offering any kind of manufacturing.  Manufacturing equipment has a number of pieces that are constantly in motion which leads to components needing to be replaced and maintained frequently.  One way to stay within a budget while purchasing and maintaining equipment is to look into refurbished products.   Purchasing and using refurbished equipment and replacement parts can save upwards of sixty percent when compared to new.  The best part, it is as equally as reliable especially with regular maintenance.

Pros of Purchasing Refurbished

Low Upfront Costs:

When purchasing reconditioned equipment and reconditioned parts business’s can save a great deal of money.  Usually the cost of equipment, in any business, is the most expensive aspect of a new business venture.  You can start-up a new endeavor at a fraction of the cost without putting all of your money into equipment and leaving yourself without a financial cushion.

Overall Value:

Purchasing equipment that has been reconditioned, especially when it comes from a reputable source with proven knowledge and experience.  When equipment is well maintained, no matter if it was brand new or purchased refurbished, it will function for years.

Wear and Tear:

The biggest benefit of purchasing refurbished equipment is that the known wear and tear on the equipment can be addressed when it is reconditioned.  If we know that an axel always fails after 4 hours of constant use, then the issue can be addressed during the refurbishment process.  Although the exterior of reconditioned equipment can show wear and tear the internal aspects will be even better than new.

There are a number of reasons that purchasing refurbished electrical components and equipment makes sense for your business.    Reconditioned components allow you to save money without sacrificing quality.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.

 

Significant Savings Seen Using Refurbished Electrical Components

In order to be successful in business, we need to be a tad prudent with how money is spent or re-invested into the business and purchasing. Is purchasing a new piece of electrical equipment the best investment, or does capitalizing on an opportunity to purchase quality refurbished electrical components at a significant savings make a viable economic sense?

Pros and Cons

Buying refurbished electrical components has its pros and cons. The pros, it is a great way to save money and in most cases the brand name equipment are built to last. Cons, it can mean money down the drain only when you don’t buy the electrical component from a reputable source and you could end up with an item that is even more damaged or missing integral parts.

Surplus electrical components can come from a few locations:

  • Assets are recovered from manufacturing plants that are closing. The surplus electrical components are then refurbished and sold at a discount.
  • Assets can be recovered from machines that are being disposed of but still have working components. Resulting in one of two situations, the components are refurbished and resold or the entire machine is refurbished.

While one of the benefits of buying reconditioned electrical components is that the items are generally set at a significantly lower price and some equipment contractors will accept returns if an item is ‘defective,’ the down side to this is that you will not get a manufacturer’s warranty.

What Does Reconditioned Mean?

Reconditioned electrical are components that are being repurposed.  They can’t be passed or sold as brand-new products but are instead reconditioned. Whether they are damaged or not, reconditioned electrical components also known as ‘remanufactured’ electrical components are completely disassembled and restored if need be in order to ensure that they perform as expected.

Therefore, before bidding on refurbished electrical components online, there are a few things to keep in mind and if possible ask questions about the item on sale. If it’s a refurbished electrical component be sure to ask about the companies return policies.

Be Cautious Where You Get Refurb Parts From

For a refurbished electrical component, beware of as it may arrive in worse conditions than the actual online photos however you are guaranteed of its safety and reliability. With most resellers and reconditioning companies, you will not be stuck with a defective refurbished electrical component if it is in fact not the right component to fix your machines issue.  An ad may give you all the specifics about the item you are about to purchase and check the seller’s feedback and buyers’ recommendations.  It is important to buy from reputable companies.  This helps to ensure that the reconditioned components that you are purchasing are as good as brand-new OEM electrical parts.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists, call 877.844.5514 today.