Tag Archives: circuit breaker

The Purpose of Circuit Breakers

Many people know that their homes have a circuit breaker but aren’t familiar with what they do or why they are important.  All of the electrical power that is supplied to your home is controlled by your homes circuit breaker.  They are used to control the flow of electricity throughout your home.  This one unit can turn the electrical power on and off within the home.  If you are experiencing an electrical surge, your homes circuit breaker will automatically cut the power supply to ensure that no major damage occurs.  This is referred to as tripping the breaker.  This can occur throughout the entire home or in just areas where a surge is experienced.

If the wires in your electrical system are unable to carry the load of electricity properly a surge has occurred.  When this happens the breaker is unable to perform properly and shuts down. The breaker will then need to be reset.  The breaker will keep tripping if the circuit continues to be over capacity.  If this occurs often your circuit breaker is not meeting the electrical capacity you require.  This signals to you, the homeowner, that it is time to upgrade your circuit breaker.

Often times the system can be upgraded by improving the capacity of the circuit breaker by adding an additional panel to the main panel.  You first must check all of the electrical components and wiring to isolate and identify the area that is not being sufficiently powered.  If it is found that there are power supply issues throughout the board it may be time to upgrade all together.  This is a common issue found in many older homes.

Electrical appliances both small and large have changed a great deal throughout the years in regards to how much electricity they require.  With this change many older homes are finding that an additional panel added on to the current circuit breaker is only a temporary fix to a much larger problem that exists.  Sometimes it is possible to get by in these situations by decreasing the amount of electricity needed throughout the home at any given time.  For instance, if the television is on in the living room and dinner is going in the oven it may trip the breaker if you decide you also want to blow dry your hair in the bathroom.

Larger homes require more electricity as well.  When you are considering any major home improvement upgrades such as an addition, upgraded kitchen or bathroom it is important to check the capacity on your current circuit breaker to ensure that you will not be taxing the supply of power.  If you find that you are switching from gas appliances to electrical appliances you may find the current circuit unable to power them without upgrading.

The circuit breaker in your home plays a huge role in protecting your family.  Without this electrical component shutting down overloaded circuits we would find an increase in electrical fires.  Overloaded systems will overheat which will cause wires to split and fires to occur.  This is why it is so important to have a basic understanding of what your homes circuit breaker does for you and to recognize the signs that it is not functioning properly.

All homeowners should know where their circuit breaker box is located, how to cut the power to not only the entire home at once but also to specific locations as well as how to change fuses contained within.  These are the basics that homeowners can handle without calling in an electrician.  It is however recommended that a certified electrician manage any additions or upgrades if you do find that the homes electrical demand is overloading the current circuits supply.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

How Circuit Breakers Can Save Your Home In A Flood

Would you know what to do or where to begin if you found that your home was in danger of flooding?  Many homeowners don’t think about flooding or believe that the probability that a flood will affect them is slim.  The truth of the matter is that floods have become one of the most common natural hazards to affect homeowners throughout the United States.  Localized flooding, from events such as water freezing and thawing, can affect smaller contained areas such as neighborhoods or smaller communities.  General flooding can occur from events such as constant rain or torrential downpours which can flood entire water systems throughout multiple states.

Flooding is a common occurrence.  They can occur no matter where you live but are more common if you live in low-lying areas, near water or downstream from a dam.  Concern yourself with flooding if your home is located by small streams, gullies, creeks, culverts, dry streambeds or low-lying dry ground that appear harmless.  If you find that a flood is imminent there are a few things that homeowners can do to prepare.

  • Electricity and water mixed together are a deadly combination.   The possibility of electrocution during a flood is high.  In order to prevent this from occurring homeowners should turn off and unplug all electrical appliances, utilities and components powered using electricity.  Homeowners should locate the homes circuit breaker and shut off the main breakers.  This will shut the electricity off throughout the entire home.  Never touch any electrical appliance or electrical component when you are wet or if you are standing in water.  Do not risk electrocution.  Even if the electrical power is shut off if an appliance is not unplugged it can still contain a power current that can cause harm.
  • Never walk through water that is moving.  The current in just six inches of moving water can cause homeowners to fall.  Locate an area where the water is not moving.  Use something long and firm to test the ground in front of you before you step.  In a flood your homes floors can become weak which can lead to a collapse.
  • Flood water is always contaminated.  Once flood water has entered your home the area is then contaminated as well.  Homeowners must clean and disinfect everything.  Electrical appliances should never be reconnected even after they have been clean and disinfected until water is no longer present.  Appliances and main electrical supplies should also be inspected by professional electricians before the homes power supply is re-established through the circuit breaker.

Flooding can affect anyone, anywhere at any time.  Homeowners should be prepared if flood conditions exist and should know what to do to protect themselves and their families.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Save Money Using Reconditioned Electrical Components

If you are looking for a real way to cut costs and save money during electrical projects consider using busway and bust ducts that are used and reconditioned.  A great advantage in using bus bars or bus ducts in electrical components is that you are able to achieve more flexible power distribution.  They are also beneficial because they are able to carry and regulate large currents of electricity.

Copper, plated aluminum and steel are the most common materials in which electrical busway and bus duct components are crafted out of.  In order to run large scale electrical equipment in several areas within an industrial setting and to remain cost effective busways, bus ducts and bus plugs are employed.  In both manufacturing and industrial settings the machines require a lot of electricity.

Normal electrical outlets do not carry enough electricity to power these large machines.  When the electrical need changes normal outlets do not cut it.  In order to manage the large supply of electricity these systems are put into place and are able to be changed in and out as needed.  If more electricity is needed, more is added.  If less is needed, it is taken away and added to another area where it will be useful.

To save money many companies turn to reconditioned or refurbished bus plugs, bus ducts and busway electrical components.  This can noticeably lessen the expense of any project.  The question that is often asked is if reconditioned electrical components are as reliable as new ones.  The answer to that is simple, yes.  Refurbished electrical components are completely repurposed so that you can enjoy the same benefits using them as you would new ones.

New products are more expensive because of the cost of the initial raw materials that are needed to create them.  To be cost effective parts are refurbished and sold at only a fraction of the cost of new products.  Repurposed electrical components are just as good as new ones.  They are also environmentally friendly and allow you to allocate funds within your electrical budget elsewhere.

No matter what you choose new or refurbished products choose a company that sells a variety of electrical components to choose from.  Whether you need to repair a new or obsolete piece of equipment they should have what you need in stock.  The last thing you need is downtime when you are trying to run a business.  Consider using refurbished bus ducts, bus plugs and busway electrical components when you are in the midst of a new project or need replacement parts to keep your company running smoothly.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Understanding Electrical Components Used In Industrial Settings

Without working every day with electrical components most people remain clueless about what the function of each individual product is.  Industrial settings are the most common situation which you would run in to needing to know about all of the different functions of electrical products.  Below you will find detailed.

Resistors

The most common component to every circuit you will come in contact with is a resistor.  A resistor is a small part that is used to create electrical resistance within the circuit.  The resistor allows a specific amount of resistance within the electronic circuit.  This element of the circuit controls the flow of current and lowers the voltage that flows through.  Without the use of resistors the electrical products that we use today would not be functional or safe.  The resistor’s qualities make it essential for the usefulness of electrical products.

Capacitors

The second most common component after the resistor is a capacitor.  The capacitor is used to store electrical charges temporarily offering a great value to the efficiency of all the products for which it is used.

When considering how a capacitor works think of it as a battery.  The difference is that a capacitor does not create electrons it only stores them.  There are a variety of capacitors including the following:

Air which is usually a capacitor used in radio tuning circuits.

Commonly used for circuits in which a timer is required, Mylar is used in clocks, an alarms or counters.

A terrific capacitor in high voltage applications is glass.

Used as a capacitor in high frequency applications such as antennas, x-rays and MRI machines is ceramic.

Diodes

A diode is a component that allows the electrical current to flow in one single direction. The device has two ends known as anode and cathode.  The diode only works when the current flows through and the positive voltage is utilized.

Transistors

Transistors are used to control the electrical voltage.  They help electricity flow between the two ends and allow electrical devices to keep functioning properly.  Transistors are popular with people as it is incredibly useful when needing to control the electrical voltage that is being sent.

Several electronic components work together in the creation of electronic boards including capacitors, resistors, diodes and transistors.  Other integrated boards use these components as well.  It is crucial that detailed information is gone through before reaching out to distributors.  Without digging through individual details of each component and understanding the value of each sector on its own as well as when used together you would find yourself with so many wholesale electronic component distributors.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.